Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Bevo Mill?
Garage door repair in Bevo Mill typically costs $150 – $600, with most jobs landing in the lower half of that range. A single broken spring runs $180 – $340, a dead opener $120 – $320, and a full new door installation $700 – $2200. Those are typical estimates for the Bevo Mill market in 2026. Every job is quoted in writing before work starts, and that written estimate sets the final price.
We work on the brands you actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our technicians have up to 13 years of experience, and we carry garage door parts so a repair usually finishes in one visit instead of stalling on a special order. Call (833) 991-7150 for a free estimate.
Key Takeaways
- Most Bevo Mill garage door repairs fall between $150 and $600.
- Spring repair is priced per spring: $180 – $340 for one. A matched pair is usually replaced together, so a pair costs about twice that.
- Opener repair runs $120 – $320; a new opener installed is $250 – $550.
- New door installation is a bigger ticket at $700 – $2200, depending on door size, material and hardware.
- We stock garage door parts, which means fewer second visits and less waiting on third-party orders.
Garage Door Cost Breakdown (2026)
Here are the typical estimated ranges we quote in Bevo Mill. Treat them as a planning tool, not a contract. The written estimate after we diagnose the door is the number that counts.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a job toward the top of a range? More than one failed part. A snapped spring often takes a cable with it, and a bent track can wear out rollers fast. When we diagnose the whole assembly on the first trip, we can tell you whether you’re looking at one repair or a package of related ones. That’s the point of fixing the mechanical door system and the opener together rather than treating them as separate problems.
What keeps a job at the low end? A single straightforward failure with parts we already carry. Roller replacement, for example, sits near the bottom because the parts are simple and the labor is quick.
What Affects Garage Door Pricing in Bevo Mill
Bevo Mill is a south St. Louis neighborhood, and the housing stock here shapes garage door pricing in ways that a generic price list won’t tell you. A lot of the homes around here were built in the early-to-mid 1900s, and many have detached or alley-facing garages that are smaller and lower-ceilinged than what you’d find in newer suburban builds. That affects which doors and openers fit and how much labor a repair takes.
- Door size and garage age. Older Bevo Mill garages often use single-car doors in tighter openings. Sizing a replacement door to an irregular opening takes more measuring and sometimes custom hardware, which adds to install cost.
- Which part failed. Springs, cables and openers sit in completely different price bands. A single spring is a modest job; a spring plus cable plus rollers adds up.
- Brand and parts availability. Because we’re factory-familiar with eight major brands and stock parts, we’re not waiting on a third-party order while your door stays stuck. If your opener is a LiftMaster or a Chamberlain, or your door is a Clopay or Amarr, we know the parts and can often fix it the same visit.
- Repair versus replace. A door with one bad panel or a worn opener is usually worth repairing. A door with a cracked panel, rusted track and a failing opener all at once may cost less to replace over time.
- St. Louis weather swings. Our summers are humid and our winters bring hard freezes. That cycle stresses springs and cables, and it’s a common reason doors fail in the same season across the neighborhood.
- How quickly you call. A small problem caught early is cheaper than a bigger one later. A dragging door or a noisy opener tends to get worse, not better.
When a door is failing in several places at once, we walk you through both paths – repair and replace – with real numbers before you decide. That’s how we keep you from paying for a fix that won’t hold, or a replacement you didn’t need.
How to Save on Garage Door
You don’t have to spend the top of the range to get your door working right. A few habits keep costs down.
- Fix the small stuff early. A noisy roller or a slightly off track is a $110 – $240 job. Left alone, it can wear the opener and cost more later.
- Bundle related repairs. If we’re already out for a spring and the cables are frayed, replacing them in the same visit saves you a second trip.
- Get the written estimate first. Free estimates mean you know the number before anyone touches the door. Call (833) 991-7150 and we’ll quote it clearly.
- Know when repair beats replacement. A door that’s structurally sound with one failing part is almost always cheaper to repair. Save the install budget for doors that are actually at the end of their life.
- Ask about parts availability. Because we stock parts, you’re less likely to pay for a return visit waiting on an order.
One more thing worth knowing: not every “expensive” repair is a bad deal. A spring at $180 – $340 on a door that would cost $700 – $2200 to replace is easy math. The trick is knowing which side of that line you’re on. Our technicians diagnose the whole system – panels, springs, tracks, openers and hardware – so you get one clear answer instead of guesswork.
If you’re in Bevo Mill and your door is acting up, we can also point you toward garage door repair in St. Louis Hills and nearby areas if you’re comparing options. But the fastest path is a phone call and a free estimate.
Do You Charge for Estimates in Bevo Mill?
No. Estimates are free. We inspect the door, tell you what’s wrong, and give you a written price before any work starts. That way you’re deciding on facts, not a phone quote that changes once we arrive. The written estimate sets the final price.
How Much Does a Broken Spring Cost in Bevo Mill?
Spring repair in Bevo Mill costs $180 – $340 for one spring. Springs almost always come in matched pairs, and when one breaks the other is usually near the end of its life too – so a pair is typically replaced together, which costs about twice that range. Springs are the most dangerous component in your garage door system, under heavy tension. We don’t recommend handling them yourself. Call (833) 991-7150 for an exact quote – estimates are free.
Can You Fix My Opener the Same Day?
Often, yes. Opener repair runs $120 – $320, and we’re familiar with the opener brands most Bevo Mill homes have – LiftMaster, Chamberlain, Genie and Craftsman among them. Because we stock parts, a lot of opener jobs finish in one visit. If it’s a full replacement, opener installation is $250 – $550. Call (833) 991-7150 to book a visit.
Is It Cheaper to Repair or Replace My Garage Door?
Repair is usually cheaper. If your door is structurally sound and one part has failed, repair at $150 – $600 beats replacement at $700 – $2200 almost every time. Replacement makes more sense when a door has multiple failures – cracked panels, a rusted track and a dying opener all at once – or when the panels aren’t worth patching. Call (833) 991-7150 and we’ll tell you honestly which side of that line your door is on. The estimate is free.
How Much Does a New Garage Door Cost in Bevo Mill?
New garage door installation in Bevo Mill typically runs $700 – $2200. The range depends on door size, material, and the hardware it needs, and older Bevo Mill garages sometimes need sizing adjustments to fit a modern door cleanly. We handle the full install, not just the repair side of the trade, so you’re not handed off to another company. Call (833) 991-7150 for a free estimate on your door.
FAQ – Garage Door Cost
What’s the average garage door repair cost in Bevo Mill?
Most repairs land between $150 and $600, with single-part fixes near the low end and multi-part jobs toward the top. Call (833) 991-7150 for an exact quote – estimates are free.
How much does a new garage door opener cost installed?
Opener installation is $250 – $550, and opener repair is $120 – $320 if the unit can be fixed instead of replaced. Call for a free estimate and we’ll tell you which makes more sense.
Why do garage door springs cost extra?
Because they’re the most dangerous and skill-dependent part of the job. Spring repair is $180 – $340 per spring, with a matched pair costing about double that since the pair is usually replaced together. Call (833) 991-7150 for a quote.
Do you charge extra to come out to Bevo Mill?
No. Estimates are free, and there’s no separate trip charge tacked onto the service price. Call (833) 991-7150 to schedule.
Can you fix my door today?
Often – same-day service is common when parts are in stock. Call (833) 991-7150 and we’ll get you booked as soon as possible. Free estimates, every time.
Ready for a straight answer on your garage door? Call (833) 991-7150 for a free estimate in Bevo Mill. We diagnose the whole system, quote it in writing, and fix it right – springs, cables, openers, panels, tracks, or a full new installation. The right part, the right fix.
Written by the team at Garage Door Repair St. Louis Hills.
Pricing reflects the Bevo Mill market as of 2026. Garage Door Repair St. Louis Hills offers free estimates – call (833) 991-7150.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Rosa Guzman"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Christine Chen"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Doug Parker